Non-isolated multi-input–single-output DC/DC converter for photovoltaic power generation systems
- Author(s): Mohammad Reza Banaei 1 ; Hossein Ardi 1 ; Rana Alizadeh 1 ; Amir Farakhor 1
-
-
View affiliations
-
Affiliations:
1:
Department of Electrical Engineering, Azarbaijan Shahid Madani University, Tabriz, Iran
-
Affiliations:
1:
Department of Electrical Engineering, Azarbaijan Shahid Madani University, Tabriz, Iran
- Source:
Volume 7, Issue 11,
November 2014,
p.
2806 – 2816
DOI: 10.1049/iet-pel.2013.0977 , Print ISSN 1755-4535, Online ISSN 1755-4543
A new multi-input non-isolated DC/DC converter with high-voltage transfer gain is proposed in this study. The presented converter consists of the conventional buck–boost and boost converters. All the stages except the last stage are buck–boost converters. The last stage is the conventional boost converter. The proposed multi-input high-voltage gain converter benefits from various advantages such as reduced semiconductor current stress, no limitation for switching duty cycle and wide control range of different input powers. The presented converter can even operate when one or some power input fail to provide energy to the load. The steady-state operation and dynamic modelling of the suggested converter are analysed thoroughly. Experimental results are also provided to verify the feasibility of the presented converter.
Inspec keywords: DC-DC power convertors; photovoltaic power systems; electric power generation
Other keywords: nonisolated multi-input–single-output DC-DC converter; semiconductor current stress; multi-input high-voltage gain converter; photovoltaic power generation systems; switching duty cycle; high-voltage transfer gain; steady-state operation; buck–boost converters; multi-input nonisolated DC-DC converter
Subjects: DC-DC power convertors; Solar power stations and photovoltaic power systems
References
-
-
1)
-
10. Oliveira, S.V.G., Barbi, I.: ‘A three-phase step-up DC–DC converter with a three-phase high-frequency transformer for DC renewable power source applications’, IEEE Trans. Ind. Electron., 2011, 58, (8), pp. 3567–3579 (doi: 10.1109/TIE.2010.2084971).
-
-
2)
-
14. Vazquez, N., Estrada, L.: ‘The tapped-inductor boost converter’. Proc. IEEE Int. Symp. Ind. Electron., 2007, pp. 531–538.
-
-
3)
-
13. Park, K.B., Moon, G.W., Youn, M.J.: ‘Non-isolated high step-up boost converter integrated with SEPIC converter’, IEEE Trans. Power Electron., 2010, 25, (9), pp. 1791–1801 (doi: 10.1109/TPEL.2010.2046650).
-
-
4)
-
30. Zeng, J., Qiao, W., Qu, L., Jiao, Y.: ‘An isolated multiport DC–DC converter for simultaneous power management of multiple different renewable energy sources’, IEEE J. Emerging Sel. Top. Power Electron., 2014, 2, (1), pp. 70–78 (doi: 10.1109/JESTPE.2013.2293331).
-
-
5)
-
7. Kuo, P.H., Liang, T.J., Tseng, K.C., Chen, J.F., Chen, S.M.: ‘An isolated high step-up forward/flyback active-clamp converter with output voltage lift’. Proc. IEEE ECCE, 2010, pp. 542–548.
-
-
6)
-
8. Lin, B.R., Liang, Y.S., Tung, C.Y., Chen, J.J., Shien, J.J.: ‘Active clamp ZVS converter with step up voltage conversion ratio’. Proc. IEEE ICIEA, 2009, pp. 2032–2037.
-
-
7)
- K.C. Tseng , T.J. Liang . Analysis of intergrated boost-flyback step-up converter. IEE Proc. Inst. Elect. Eng. Electr. Power Appl. , 2 , 217 - 22
-
8)
- L. Solero , A. Lidozzi , J. Pomilio . Design of multiple-input power converter for hybrid vehicles power electronics. IEEE Trans. Power Electron. , 5 , 1007 - 1016
-
9)
-
9. Chung, S.K., Lim, J.G., Song, Y.: ‘Active clamped three-phase isolated boost converter with series output connection for high step-up applications’. Proc. IEEE ECCE, 2010, pp. 1090–1097.
-
-
10)
- Z. Chen , J.M. Guerrero , F. Blaabjerg . A review of the state of the art of power electronics for wind turbines. IEEE Trans. Power Electron. , 8 , 1859 - 1875
-
11)
-
29. Kumar, L., Jain, S.: ‘A novel dual input DC/DC converter topology’. IEEE Int. Conf. on Power Electronics, Drives and Energy Systems, 16–19 December 2012, Bengaluru, India.
-
-
12)
- X. Feng , J. Liu , F.C. Lee . Impedance specifications for stable DC distributed power systems. IEEE Trans. Power Electron , 2 , 157 - 162
-
13)
-
4. Hosseini, S.H., Farakhor, A., Haghighian, S.K.: ‘Novel algorithm of MPPT for PV array based on variable step Newton–Raphson method through model predictive control’. 13th Int. Conf. on Control, Automation and Systems (lCCAS 2013), 20–23 October 2013, Gwangju, Korea, pp. 1577–1582.
-
-
14)
-
20. Barreto, L.H.S.C., Coelho, E.A.A., Freitas, L.C., Farias, V.J., Vieira, J.B.Jr.: ‘An optimal lossless commutation quadratic PWM boost converter’, Proc. IEEE Appl. Power Electron. Conf. Expo., 2002, 2, pp. 624–629.
-
-
15)
- L.H.S.C. Barreto , E.A.A. Coelho , V.J. Farias , J.C. Oliveira , L.C. de Freitas , J.B. Vieira . A quasi-resonant quadratic boost converter using a single resonant network. IEEE Trans. Ind. Electron. , 2 , 552 - 557
-
16)
- D. Doncker , D.M. Divan , M.H. Kheraluwala . A three-phase soft-switched high power density DC/DC for high power applications. IEEE Trans. Ind. Appl. , 1 , 63 - 73
-
17)
-
21. Di Napoli, A., Crescimbini, F., Solero, L., Caricchi, F., Capponi, F.G.: ‘Multiple-input DC–DC power converter for power-flow management in hybrid vehicles’. Proc. IEEE Ind. Appl. Conf., 2002, pp. 1578–1585.
-
-
18)
- Y. Zhao , W. Li , Y. Deng , X. He . Analysis, Design and experimentation of isolated ZVT Boost converter with coupled inductors. IEEE Trans. Power Electron. , 2 , 541 - 550
-
19)
-
34. Kazimierczuk, M.K.: ‘Pulse-width modulated DC-DC power converters’ (Wiley Press, 2008, 1st edn.), pp. 31–38.
-
-
20)
-
22. Usman, A., Izhar, T.: ‘Z-source inverter based indirect field oriented control with synchronous current injection and feed forward CEMF compensation for an induction motor drive’. IEEE Student Conf. on Research and Development, 2011, pp. 40–45.
-
-
21)
- W. Li , J. Liu , J. Wu , X. He . Design and analysis of isolated ZVT boost converters for high-efficiency and high-step-up applications. IEEE Trans. Power Electron. , 6 , 2363 - 2374
-
22)
-
12. Spiazzi, G., Mattavelli, P., Gazoli, J.R., Magalhaes, R., Frattini, G.: ‘Improved integrated boost flyback high step-up converter’. Proc. IEEE Ind. Technol. Conf., 2010, pp. 1169–1174.
-
-
23)
-
7. Zhou, L.W., Zhu, B.X., Luo, Q.M.: ‘High step-up converter with capacity of multiple input’, IET Power Electron., 2012, 5, (5), pp. 524–531 (doi: 10.1049/iet-pel.2011.0177).
-
-
24)
-
31. Yuan-mao, Y., Cheng, K.W.E.: ‘Multi-input voltage-summation converter based on switched-capacitor’, IET Power Electron., 2013, 6, (9), pp. 1909–1916 (doi: 10.1049/iet-pel.2013.0015).
-
-
25)
- Q. Wang , J. Zhang , X. Ruan , K. Jin . Isolated single primary winding multiple-input converters. IEEE Trans. Power Electron. , 12 , 3435 - 3442
-
26)
-
23. Tao, H., Kotsopoulos, A., Duarte, J.L., Hendrix, M.A.M.: ‘Family of multiport bidirectional DC–DC converters’. Proc. IEEE Electron. Power, 2008, pp. 451–458.
-
-
27)
-
19. Ismail, E.H., Al-Saffar, M.A., Sabzali, A.J., Fardoun, A.A.: ‘High voltage gain single-switch non isolated DC–DC converters for renewable energy applications’. Proc. IEEE Int. Conf. Sustainable Energy Technol. Conf., 2010, pp. 1–6.
-
-
28)
- C. Mi , H. Bai , C. Wang , S. Gargies . Operation, design and control of dualH-bridge-based isolated bidirectional DC–DC converter. IET Power Electron. , 4 , 507 - 517
-
29)
-
24. Dobbs, B.G., Chapman, P.L.: ‘A multiple-input DC–DC converter topology’, IEEE Power Electron. Lett., 2009, 1, (1), pp. 6–9.
-
-
30)
- F. Blaabjerg , Z. Chen , S.B. Kjaer . Power electronics as efficient interface in dispersed power generation systems. IEEE Trans. Power Electron. , 5 , 1184 - 1194
-
31)
-
33. Danyali, S., Hosseini, S.H., Gharehpetian, G.B.: ‘New extendable single-stage multi-input DC–DC/AC boost converter’, IEEE Trans. Power Electron., 2014, 29, (2), pp. 775–788 (doi: 10.1109/TPEL.2013.2256468).
-
-
32)
-
11. Kim, K.D., Kim, J.G., Jung, Y.C., Won, C.Y.: ‘Improved non-isolated high voltage gain boost converter using coupled inductors’. Proc. IEEE Int. Conf. Electric. Mach. Syst., 2011, pp. 20–23.
-
-
33)
- A. Khaligh , A.M. Rahimi , A. Emadi . Modified pulse-adjustment technique to control DC/DC converters driving variable constant-power loads. IEEE Trans. Ind. Electron. , 3 , 1133 - 1146
-
1)