© The Institution of Engineering and Technology
In this study, a new high step-up current-fed zero voltage switching (ZVS) dual half-bridge DC–DC converter is proposed. The presented topology is composed of two paralleled boost half-bridge converters. In this converter, only two switches are efficiently utilised such that the adopted scheme has a simpler control circuit, lower losses and lower cost. It is very noteworthy that over the whole range of load and input voltage variations, the switches keep ZVS operation and the output diodes operate in zero current switching (ZCS) condition leading to high overall efficiency. Also, taking the advantage of voltage-doubler circuits, transformers with lower turn-ratio and diodes with lower reverse voltage can be used to build the desired high output voltage. Regarding the mentioned characteristics, the proposed converter can be well nominated for distributed generation systems. In-depth analysis, design and performance comparison of this new converter are illustrated; then for verification purpose, experimental results with an output voltage of 400 V and output current of 2.5 A are presented.
References
-
-
1)
-
A.K. Rathore ,
A.K.S. Bhat ,
R. Oruganti
.
Analysis, design and experimental results of wide range ZVS active-clamped L-L type current-fed DC/DC converter for fuel cells to utility interface.
IEEE Trans. Ind. Electron.
,
1 ,
473 -
485
-
2)
-
18. Liang, Z., Guo, R., Wang, G., Huang, A.: ‘A new wide input range high efficiency photovoltaic inverter’. Proc. IEEE Energy Conversion Congr. and Expos., 2010, pp. 2937–2943.
-
3)
-
13. Beiranvand, R., Zolghadri, M.R., Rashidian, B., Alavi, S.M.H.: ‘Optimizing the LLC–LC resonant converter topology for wide-output-voltage and wide-output-load applications’, IEEE Trans. Power Electron., 2011, 26, (11), pp. 3192–3204 (doi: 10.1109/TPEL.2011.2143429).
-
4)
-
14. Hu, H., Fang, X., Chen, F., Shen, Z.J., Batarseh, I.: ‘A modified high-efficiency LLC converter with two transformers for wide input-voltage range applications’, IEEE Trans. Power Electron., 2013, 28, (4), pp. 1946–1960 (doi: 10.1109/TPEL.2012.2201959).
-
5)
-
S. Han ,
H. Yoon ,
G. Moon ,
M. Youn ,
Y. Kim ,
K. Lee
.
A new active clamping zero-voltage switching PWM current-fed half-bridge converter.
IEEE Trans. Power Electron.
,
6 ,
1271 -
1279
-
6)
-
R.L. Andersen ,
I. Barbi
.
A three-phase current-fed push–pull DC–DC converter.
IEEE Trans. Power Electron.
,
2 ,
358 -
368
-
7)
-
7. Rathore, A.K., Bhat, A.K.S., Oruganti, R.: ‘A comparison of soft-switched DC-DC converters for fuel cell to utility interface application’. Power Conversion Conf., Nagoya, 2007, pp. 588–594.
-
8)
-
6. Kong, X., Choi, L.T., Khambadkone, A.M.: ‘Analysis and control of isolated current-fed full bridge converter in fuel cell system’. Industrial Electronics Society, 2004. , pp. 2825–2830.
-
9)
-
11. Lee, S., Choi, S.: ‘A three-phase current-fed push-pull DC–DC converter with active clamp for fuel cell applications’. Applied Power Electronics Conf. and Exposition (APEC), 2010, pp. 1934–1941.
-
10)
-
M.D. Lukas ,
K.Y. Lee ,
H. Ghezel-Ayagh
.
An explicit dynamic model for direct reforming carbonate fuel cell stack.
IEEE Trans. Energy Convers.
,
3 ,
289 -
295
-
11)
-
S.-J. Jang ,
C.-Y. Won ,
B.-K. Lee ,
J. Hur
.
Fuel cell generation system with a new active-clamping current-fed half-bridge converter.
IEEE Trans. Energy Convers.
,
2 ,
332 -
340
-
12)
-
K. Rajashekara
.
Hybrid fuel-cell strategies for clean power generation.
IEEE Trans. Ind. Appl.
,
3 ,
682 -
689
-
13)
-
12. Fang, X., Hu, H., Shen, Z.J., Batarseh, I.: ‘Operation mode analysis and peak gain approximation of the LLC resonant converter’, IEEE Trans. Power Electron., 2012, 27, (4), pp. 1985–1995 (doi: 10.1109/TPEL.2011.2168545).
-
14)
-
J.M. Carrasco ,
L.G. Franquelo ,
J.T. Bialasiewicz
.
Power-electronic systems for the grid integration of renewable energy sources: a survey.
IEEE Trans. Ind. Electron.
,
1002 -
1016
-
15)
-
17. Il-Oun, L., Gun-Woo, M.: ‘Soft-switching DC/DC converter with a full ZVS range and reduced output filter for high-voltage applications’, IEEE Trans. Power Electron., 2013, 28, (1), pp. 112–122 (doi: 10.1109/TPEL.2012.2199520).
-
16)
-
H. Xu ,
L. Kong ,
X. Wen
.
Fuel cell power system and high power DC-DC converter.
IEEE Trans. Power Electron.
,
5 ,
1250 -
1255
-
17)
-
R.J. Wai ,
R.Y. Duan
.
High-efficiency power conversion for low power fuel cell generation system.
IEEE Trans. Power Electron.
,
4 ,
847 -
856
-
18)
-
16. Prasanna, U.R., Akshay, K.R.: ‘Extended range ZVS active-clamped current-fed full-bridge isolated DC/DC converter for fuel cell applications: analysis, design, and experimental results’, IEEE Trans. Ind. Electron., 2013, 60, (7), pp. 2661–2672 (doi: 10.1109/TIE.2012.2194977).
-
19)
-
Ch. Hanju ,
Ch. Jungwan ,
P.N. Enjeti
.
A three-phase current-fed DC/DC converter with active clamp for low-DC renewable energy sources.
IEEE Trans. Power Electron.
,
2784 -
2793
-
20)
-
14. Rathore, A.K., Bhat, A.K.S., Oruganti, R.: ‘Analysis and design of active-clamped ZVS current-fed DC-DC converter for fuel cells to utility interface application’. Proc. IEEE Int. Conf. on Industrial and Information Systems, Sri Lanka, 2007, pp. 503–508.
-
21)
-
7. Beiranvand, R., Rashidia, B.: ‘Optimizing the normalized dead-time and maximum switching frequency of a wide-adjustable-range LLC resonant converter’, IEEE Trans. Power Electron., 2011, 26, (2), pp. 462–472 (doi: 10.1109/TPEL.2010.2068563).
-
22)
-
8. Yakushev, V., Meleshin, V., Fraidlin, S.: ‘Full-bridge isolated current fed converter with active clamp’. Applied Power Electronics Conf. and Exposition, 1999, vol. 1, pp. 560–566.
http://iet.metastore.ingenta.com/content/journals/10.1049/iet-pel.2013.0839
Related content
content/journals/10.1049/iet-pel.2013.0839
pub_keyword,iet_inspecKeyword,pub_concept
6
6