© The Institution of Engineering and Technology
Fault current limiters are playing an ever more important role in today's power systems and many of their different types have now reached maturity. Owing to the progress in superconducting technology, the superconducting fault current limiter (SFCL) has attracted increasing attentions. To investigate the efficacy of SFCL devices from a system point of view, the fault current limiting impedance is of great importance. This study proposed an improved structure of flux-lock type of SFCL and compares the current limiting impedance of different layouts. It focuses on the impacts of iron core shape on primary winding inductance. The analyses include simulations based on finite element method carried out in the simulation software ANAlysis SYStem (ANSYS). This study shows that an E–E-shaped core with an air gap is better than a closed core when being used for an SFCL. It is also found that for an iron core SFCL with fixed size, its rated fault current limiting impedance can be adjusted by changing the cross-sectional area of the iron core centre leg and the length of the air gap.
References
-
-
1)
-
27. Grekhov, I., Delimova, L., Liniichuk, I., et al: ‘Growth mode study of ultrathin HTSC YBCO films on YBaCuNbO buffer’, Physica C, 1999, 324, pp. 39–46 (doi: 10.1016/S0921-4534(99)00423-2).
-
2)
-
24. Zhao, C., Lu, J., Fang, Z., et al: ‘Study of a novel fault current limiter on the basis of high speed switch and triggered vacuum switch’. Fifth Int. Conf. on Critical Infrastructure (CRIS), 2010, pp. 1–5.
-
3)
-
23. Gyimesi, M., Ostergaard, D.: ‘Inductance computation by incremental finite element analysis’, IEEE Trans. Mag., 1999, 35, (3), pp. 1119–1122 (doi: 10.1109/20.767144).
-
4)
-
17. Choi, H.S., Lim, S.H.: ‘Operating performance of the flux-lock and the transformer type superconducting fault current limiter using YBCO thin film’, IEEE Trans. Appl. Supercond., 2007, 17, (2), pp. 1823–1826 (doi: 10.1109/TASC.2007.898482).
-
5)
-
8. Kalsi, S.S., Malozemoff, A.: ‘HTS fault current limiter concept’. PESGM, 2004, pp. 1–5.
-
6)
-
25. Li, X.W.: ‘One kind of short circuit fault current limiter’, , July2014., .
-
7)
-
12. Faried, S.O., Elsamahy, M.: ‘Incorporating superconducting fault current limiters in the probabilistic evaluation of transient recovery voltage’, IET Gener. Transm. Distrib., 2011, 5, (1), pp. 101–107 (doi: 10.1049/iet-gtd.2010.0312).
-
8)
-
16. Matsumura, T., Uchii, T., Yokomizu, Y.: ‘Development of flux-lock-type fault current limiter with high-Tc superconducting element’, IEEE Trans. Appl. Supercond., 1997, 7, pp. 1001–1004 (doi: 10.1109/77.614676).
-
9)
-
21. Choi, H.S., Lee, N.Y., Han, Y.H., et al: ‘The characteristic analysis between flux-coupling and flux-lock type SFCL according to variations of turn ratios’, IEEE Trans. Appl. Supercond., 2008, 18, (2), pp. 737–740 (doi: 10.1109/TASC.2008.920637).
-
10)
-
14. Chabanloo, R.M., Abyaneh, H.A., Agheli, A., et al: ‘Overcurrent relays coordination considering transient behavior of fault current limiter and distributed generation in distribution power network’, IET Gener. Transm. Distrib., 2011, 5, (9), pp. 903–911 (doi: 10.1049/iet-gtd.2010.0754).
-
11)
-
26. Endo, M., Hori, T., Koyama, T., et al: ‘Development pf a superconducting fault current limiter using various high-speed circuit breakers’, IET Electr. Power Appl., 2009, 3, (4), pp. 363–370 (doi: 10.1049/iet-epa.2007.0499).
-
12)
-
20. Du, H.I., Kim, Y.J., Lee, D.H., et al: ‘Effect of the resistance of two different coated conductor on the current-limiting performance of flux-lock type superconducting fault current limiters’, IEEE Trans. Appl. Supercond., 2011, 21, (3), pp. 1254–1257 (doi: 10.1109/TASC.2011.2104350).
-
13)
-
13. Yang, J., Fletcher, J.E., O'Reilly, J.: ‘A series-dynamic-resistor-based converter protection scheme for doubly-fed induction generator during various fault conditions’, IEEE Trans. Energy Convers., 2010, 25, (2), pp. 422–432 (doi: 10.1109/TEC.2009.2037970).
-
14)
-
34. Nakamiya, T., Ikegami, T., Ebihara, K.: ‘Numerical simulation of current-quenching phenomena for high Tc YBaCuO superconducting thin films’, IEEE Trans. Appl. Supercond., 1995, 5, (2), pp. 532–535 (doi: 10.1109/77.402605).
-
15)
-
29. Salon, S.J.: ‘Finite element analysis of electrical machines’ (Kluwer, Norwell, MA, USA, 1995).
-
16)
-
13. Lin, C.-H., Tsao, T.-P.: ‘Suppress vibrations on turbine blades by high-temperature superconductive fault current limiter’, IET Gener. Transm. Distrib., 2001, 148, (2), pp. 97–103 (doi: 10.1049/ip-gtd:20010154).
-
17)
-
15. Blair, S.M., Booth, C.D., Elders, I.M., et al: ‘Superconducting fault current limiter application in a power-dense marine electrical system’, IET Electr. Syst. Transp., 2011, 1, (3), pp. 93–102 (doi: 10.1049/iet-est.2010.0053).
-
18)
-
35. Arai, K., Yamasaki, H., Kaiho, K., et al: ‘Temperature characteristics of superconducting thin-film fault current limiting elements using high-resistivity alloy shunt layers’, IEEE Trans. Appl. Supercond., 2007, 17, (2), pp. 1843–1846 (doi: 10.1109/TASC.2007.898200).
-
19)
-
19. Lim, S.H., Moon, J.F., Kim, J.C.: ‘Improvement on current limiting characteristic of a flux-lock type SFCL using E-I core’, IEEE Trans. Appl. Supercond., 2009, 19, (3), pp. 1904–1907 (doi: 10.1109/TASC.2009.2018053).
-
20)
-
9. Kovalsky, L., Yuan, X., Tekletsadik, K., et al: ‘Applications of superconducting fault current limiters in electric power transmission systems’, IEEE Trans. Appl. Supercond., 2005, 15, pp. 2130–2133 (doi: 10.1109/TASC.2005.849471).
-
21)
-
10. Zhao, Y., Li, Y., Saha, T.K., et al: ‘Mitigation of distributed generation impact on protective devices in a distribution network by superconducting fault current limiter’. Sixth Asia-Pacific Power and Energy Engineering Conf., 12–14 July 2014, pp. 1–6.
-
22)
-
28. Notaros, B.M.: ‘Electromagnetics’ (Prentice-Hall, Upper Saddle River, NJ, 2011).
-
23)
-
5. Zhang, Y., Dougal, R.A.: ‘State of the art of fault current limiters and their applications in smart grid’. PESGM, 2012, pp. 1–6.
-
24)
-
31. ‘ANSYS 15.0 product documentation’. .
-
25)
-
32. Sugita, S., Ohsaki, H.: ‘FEM analysis of current limiting characteristics of a superconducting thin film current limiting device by the current vector potential method’, IEEE Trans. Appl. Supercond.,2003, 13, (2), pp. 2020–2023 (doi: 10.1109/TASC.2003.812972).
-
26)
-
3. Kai, T., Takeuchi, N., Funabashi, T., et al: ‘A simplified fault currents analysis method considering transient of synchronous machine’, IEEE Trans. Energy Convers., 1997, 12, (3), pp. 225–231 (doi: 10.1109/60.629707).
-
27)
-
33. Ohsaki, H., Sekino, M., Nonaka, S.: ‘Characteristics of resistive fault current limiting elements using YBCO superconducting thin film with meander-shaped metal layer’, IEEE Trans. Appl. Supercond., 2009, 19, (3), pp. 1818–1822 (doi: 10.1109/TASC.2009.2019040).
-
28)
-
18. Kim, J.S., Lim, S.H., Kim, J.C.: ‘Study on protection coordination of a flux-lock type SFCL with over-current relay’, IEEE Trans. Appl. Supercond., 2010, 20, (3), pp. 1159–1163 (doi: 10.1109/TASC.2010.2045749).
-
29)
-
6. Larbalestier, D.C., Gurevich, A., Feldmann, D.: ‘High-Tc superconducting materials for electric power’. Nature, 2001, pp. 368–369.
-
30)
-
29. Firouzi, M., Gharehpetian, G.B.: ‘Improving fault ride-through capability of fixed-speed wind turbine by using bridge-type fault current limiter’, IEEE Trans. Energy Convers., 2013, 28, (2), pp. 361–369 (doi: 10.1109/TEC.2013.2248366).
-
31)
-
3. Brahma, S.M., Girgis, A.A.: ‘Development of adaptive protection schemes for distribution systems with high penetration of distribution generation’, IEEE Trans. Power Deliv., 2004, 19, (1), pp. 56–63 (doi: 10.1109/TPWRD.2003.820204).
-
32)
-
7. Giese, R.F., Sheahen, T.P., Wolsky, A.M., et al: ‘High-temperature superconductors: their potential for utility applications’, IEEE Trans. Energy Convers., 1992, 7, (3), pp. 589–597 (doi: 10.1109/60.148582).
-
33)
-
30. Chan, T.F., Wang, W., Lai, L.L.: ‘Performance of an axial-flux permanent magnetic synchronous generator from 3-D finite-element analyses’, IEEE Trans. Energy Convers., 2010, 25, (3), pp. 669–676 (doi: 10.1109/TEC.2010.2042057).
-
34)
-
11. Zhao, Y., Krause, O., Saha, T.K., et al: ‘Stability enhancement in distribution systems with DFIG-based wind turbine by use of SFCL’. Australian University Power Engineering Conf., 29 September–3 October 2013, pp. 1–6.
-
35)
-
22. Lim, S.H., Choi, H.S., Han, B.S.: ‘Fault current limiting characteristic due to winding direction between coil 1 and coil 2 in a flux-lock type SFCL’, Physica C,2004, 416, pp. 34–42 (doi: 10.1016/j.physc.2004.08.019).
http://iet.metastore.ingenta.com/content/journals/10.1049/iet-gtd.2015.1020
Related content
content/journals/10.1049/iet-gtd.2015.1020
pub_keyword,iet_inspecKeyword,pub_concept
6
6