References

• 1. 1)
     • 20. Guerbas, F., Zitouni, M., Boubakeur, A., et al: ‘Barrier effect on breakdown of point-plane oil gaps under alternating current voltage’, IET Gener. Transm. Distrib., 2010, 4, (11), pp. 1245–1250 (doi: 10.1049/iet-gtd.2010.0231).
  2. 2)
     • 5. Beroual, A., Boubakeur, A.: ‘Influence of barriers on the lightning and impulse strength of mean air gaps in point/plane arrangements’, IEEE Trans. Electr. Insul., 1991, 26, (6), pp. 1130–1139 (doi: 10.1109/14.108150).
  3. 3)
     • 1. Derler, F., Kirch, J., Krause, C.H., et al: ‘Development of a design method for insulating structures exposed to electric stress in long oil gaps and a long oil/transformer board interfaces’. 7th Int. Symp. High Voltage Engineering, Dresden, Germany, 1991, pp. 73–76, paper 21.16, B.
  4. 4)
     • 10. Mihailescu, M., Samuila, A., Urs, A., et al: ‘Computer-assisted experimental design for the optimization of electrostatic separation processes’, IEEE Trans. Ind. Appl., 2002, 38, (5), pp. 1174–1181 (doi: 10.1109/TIA.2002.802897).
  5. 5)
     • 4. Boubakeur, A.: ‘Influence des barrières sur la tension de décharge disruptive des moyens intervalles d'air pointe – plan’. PhD thesis, Technical University of Warsaw, Poland, 1979.
  6. 6)
     • 18. Erikson, L., Johansson, E., Kettaneh, , et al: ‘Design of experiments’ (Umetrics Academy, Sweden, 2000).
  7. 7)
     • 17. Vivier, S., Gillon, F., Brochet, P.: ‘Optimization techniques derived from experimental design method and their application to the design of brushless direct motor’, IEEE Trans. Magn., 2001, 37, (5), pp. 3622–3626 (doi: 10.1109/20.952676).
  8. 8)
     • 6. Zouaghi, A., Beroual, A.: ‘Discharge structure and dielectric strength of long oil gaps in the presence of insulating barrier’. IEEE Conf. Electrical Insulation and Dielectric Phenomena, Minneapolis, 19–22 October 1997, pp. 660–663.
  9. 9)
     • 2. Beroual, A., Zouaghi, A.: ‘Barrier effect on the pre-breakdown and breakdown phenomena in long oil gaps’. Conf. Record of the ICDL 96 12th Int. Conf. Conduction and Breakdown in Dielectric Liquids, Roma, Italy, July 1996, pp. 300–303.
  10. 10)
      • 12. Saungmin, P.: ‘Statistical design of experiments and analysis on gate poly-silicon critical dimension’, IEEE Trans. Semicond. Manufact., 2004, 17, (3), pp. 362–374 (doi: 10.1109/TSM.2004.831526).
  11. 11)
      • 19. Guerbas, F., Zitouni, M., Boubakeur, A., et al: ‘Barrier diameter effect on the behavior of transformer oil submitted to AC voltage’. Int. Conf. High Voltage Engineering Applications (ICHVE), Shanghai, China, 17–20 September 2012, pp. 570–574.
  12. 12)
      • 11. Dascalescu, L., Tilmatine, A., Aman, F., et al: ‘Optimization of electrostatic separation processes using response surface modeling’, IEEE Trans. Ind. Appl., 2004, 40, (1), pp. 53–59 (doi: 10.1109/TIA.2003.821812).
  13. 13)
      • 16. Brisset, S., Gillon, F., Vivier, S., et al: ‘Optimization with experimental design: an approach using Taguchi's methodology and finite element simulations’, IEEE Trans. Magn., 2001, 37, (5), pp. 3530–3535 (doi: 10.1109/20.952654).
  14. 14)
      • 7. IEC 60156: ‘Insulating liquids – determination of the breakdown voltage at power frequency – test method’, August 1995.
  15. 15)
      • 13. Li, X., Wang, K., Mu, W.: ‘Research on SID-IIs Rib characteristic based on DOE’. Int. Conf. Electrical & Mechanical Engineering Information Technique (EMEIT), Harbin, China, 12–14 August 2011, vol. 7, pp. 3482–3484.
  16. 16)
      • 3. Guerbas, F.: ‘Influence des barrières sur la rigidité diélectrique de l'huile minérale’. PhD thesis, Department of Electrical Engineering, Ecole National Polytechnique, Algiers, June 2011.
  17. 17)
      • 9. Foucher, J.: ‘Les plans d'expériences pour le réglage de commandes à base de logique floue’. PhD thesis, Institut National Polytechnique, Toulouse, France, 2006.
  18. 18)
      • 8. Tilmatine, A., Mihailescu, M., Luga, A., et al: ‘A linear interaction optimization model using Taguchi's experimental design technique’, IEEE Ind. Appl. Mag., 2004, 10, (10), pp. 19–25.
  19. 19)
      • 14. Dascalescu, L., Medles, K., Das, S., et al: ‘Using desing of experiments and vertual instrumentation to evaluate the tribcharging of pulvelurent materials in compressed-air devices’, IEEE Trans. Ind. Appl., 2008, 44, (1), pp. 3–8 (doi: 10.1109/TIA.2007.912801).
  20. 20)
      • 15. Sandrine, K.: ‘Application de la méthodologie des plans d'expériences et de l'analyse de données à l'optimisation des processus de dépôt’. PhD thesis, Limoges, France, 2004.