© The Institution of Engineering and Technology
Bus voltage is a direct reliability indicator of a transmission network because it is related to system reactive and active power balance especially during a contingency state. This study proposes a technique to evaluate network operational reliability based on bus voltage. Two new voltage related bus reliability indices are proposed to represent bus reliability. Network reliability levels under various operating conditions and contingency states are evaluated and presented by probabilities of system voltage being in normal, under-voltage, critical and collapse zones. The probabilistic voltage margin to the collapse point for each bus is evaluated to provide information for system operator regarding the risk under system random failures and load uncertainty. The IEEE 30-bus system and a practical 220 kV Taiyuan power system in Shanxi Province of China have been analysed to illustrate the proposed techniques.
References
-
-
1)
-
1. Taylor, C.W.: ‘Power system voltage stability’ (McGraw-Hill Inc, New York, 1994).
-
2)
-
17. Chen, K., Hussein, A., Bradley, M.E., Wan, H.: ‘A performance-index guided continuation method for fast computation of saddle-node bifurcation in power systems’, IEEE Trans. Power Syst., 2003, 18, (2), pp. 753–760 (doi: 10.1109/TPWRS.2003.811203).
-
3)
-
J. A. Momoh ,
Y. V. Makarov ,
W. Mittelstadt
.
A framework of voltage stability assessment in power reliability analysis.
IEEE Trans. Power Syst.
,
2 ,
484 -
491
-
4)
-
19. Chen, Y.L., Chang, C.W., Liu, C.C.: ‘Efficient methods for identifying weak nodes in electrical power networks’, IEE Proc.-Gener. Transm. Distrib., 1995, 142, (3), pp. 317–322 (doi: 10.1049/ip-gtd:19951728).
-
5)
-
IEEE reliability test system.
IEEE Trans. Power Appar. Syst.
,
6 ,
2047 -
2054
-
6)
-
22. Billinton, R., Allan, R.N.: ‘Reliability evaluation of power systems’ (Plenum Press, New York and London, 1996, 2nd ed.).
-
7)
-
P. Kessel ,
H. Glavitsch
.
Estimating the voltage stability and loadability of power systems.
IEEE Trans. Power Deliv.
,
3 ,
1586 -
1599
-
8)
-
21. Qin, W., Wang, P., Song, J., Wang, Z.: ‘Reactive power impact on reliability of 220 kV Taiyuan power system’. The 11th Int. Conf. on PMAPS, Singapore, July 2010, pp. 648–653.
-
9)
-
3. Ringlee, R.J., Albrecht, P.: ‘Bulk power system reliability criteria and indices trends and future needs’, IEEE Trans. Power Syst., 1994, 9, (1), pp. 181–190 (doi: 10.1109/59.317611).
-
10)
-
18. Qin, W., Wang, P., Kang, C.: ‘Improved bisection searching technique for voltage collapse analysis in reliability evaluation’. The 11th Int. Conf. on PMAPS, Singapore, July 2010, pp. 621–625.
-
11)
-
Y. Chen
.
Weak bus-oriented optimal multi-objective VAR planning.
IEEE Trans. Power Syst.
,
1885 -
1890
-
12)
-
15. System Dynamic Performance Subcommittee of the IEEE Power System Engineering Committee: ‘Voltage stability of power systems: concepts, analytical tools and industry experience’. .
-
13)
-
R. Billinton ,
G. Lian
.
Composite power system health analysis using a security constrained adequacy evaluation procedure.
IEEE Trans. Power Syst.
,
2 ,
936 -
941
-
14)
-
R. Billinton ,
S. Aboreshaid
.
Voltage stability considerations in composite power system reliability evaluation.
IEEE Trans. Power Syst.
,
2 ,
655 -
660
-
15)
-
12. Zabaiou, T., Dessaint, L., Kamwa, I.: ‘Preventive control approach for voltage stability improvement using voltage stability constrained optimal power flow based on static line voltage stability indices’, IET Gener. Transm. Distrib., 2014, 8, (5), pp. 924–934 (doi: 10.1049/iet-gtd.2013.0724).
-
16)
-
24. Abed, A.M.: ‘WSCC voltage stability criteria, undervoltage load shedding strategy, and reactive power reserve monitoring methodology’. IEEE Power Engineering Society Summer Meeting, 1999.July 1999, vol. 1, pp. 191–197.
-
17)
-
8. Aboreshsid, S., Billinton, R.: ‘Probabilistic evaluation of voltage stability’, IEEE Trans. Power Syst., 1999, 14, (1), pp. 342–348 (doi: 10.1109/59.744553).
-
18)
-
16. Chiang, H.D., Jean-Jumeau, R.: ‘Toward a practical performance index for predicting voltage collapse in electric power systems’, IEEE Trans. Power Syst., 1995, 10, (2), pp. 584–592 (doi: 10.1109/59.387892).
-
19)
-
R. Billinton ,
M. Fotuhi-Firuzabad
.
Generating system operating health analysis considering stand-by units, interruptible load and postponable outages.
IEEE Trans. Power Syst.
,
3 ,
1618 -
1625
-
20)
-
2. Mahmoud, G.A.: ‘Voltage stability analysis of radial distribution networks using catastrophe theory’, IET Gener. Transm. Distrib., 2012, 6, pp. 612–618 (doi: 10.1049/iet-gtd.2011.0530).
-
21)
-
A.C.G. Meio ,
J.C.O. Mello ,
S. Granville
.
The effects of voltage collapse problems in the reliability evaluation of composite systems.
IEEE Trans. Power Syst.
,
1 ,
480 -
488
-
22)
-
20. Saadat: ‘Power system analysis’ (McGraw-Hill, New York, 1999).
-
23)
-
11. Raja, P., Selvan, M.P., Kumaresan, N.: ‘Enhancement of voltage stability margin in radial distribution system with squirrel cage induction generator based distributed generators Voltage collapse index’, IET Gener. Transm. Distrib., 2013, 7, (8), pp. 898–906 (doi: 10.1049/iet-gtd.2012.0579).
-
24)
-
R. Billinton ,
E. Khan
.
A Security based approach to composite power system reliability evaluation.
IEEE Trans. Power Syst.
,
1 ,
65 -
72
http://iet.metastore.ingenta.com/content/journals/10.1049/iet-gtd.2014.0198
Related content
content/journals/10.1049/iet-gtd.2014.0198
pub_keyword,iet_inspecKeyword,pub_concept
6
6