References

• 1. 1)
     • 13. Grewal, K., Darnell, P.: ‘Model-based EV range prediction for electric hybrid vehicles’. Hybrid and Electric Vehicles Conf. (HEVC), London, November 2013, pp. 1–6.
  2. 2)
     • 29. Pesaran, A., Santhanagopalan, S., Kim, G.: ‘Addressing the impact of temperature extremes on large format li-ion batteries for vehicle applications (presentation)’. Technical Report, National Renewable Energy Laboratory (NREL), Golden, CO, 2013.
  3. 3)
     • 23. Yi, Z., Bauer, P.H.: ‘Sensitivity analysis of environmental factors for electric vehicles energy consumption’. Vehicle Power and Propulsion Conf. (VPPC), Montreal, Canada, October 2015, pp. 1–6.
  4. 4)
     • 7. Chan, C.: ‘The state of the art of electric, hybrid, and fuel cell vehicles’, Proc. IEEE, 2007, 95, (4), pp. 704–718.
  5. 5)
     • 21. Bilgin, B., Magne, P., Malysz, P., et al: ‘Making the case for electrified transportation’, IEEE Trans. Transp. Electrification, 2015, 1, (1), pp. 4–17.
  6. 6)
     • 6. Sundström, O., Binding, C.: ‘Optimization methods to plan the charging of electric vehicle fleets’, ACEEE Int. J. Commun., 2010, 1, (2), pp. 45–50.
  7. 7)
     • 24. Irving, A.: ‘Stochastic sensitivity analysis’, Appl. Math. Model., 1992, 16, (1), pp. 3–15.
  8. 8)
     • 3. Sperling, D.: ‘Future drive: electric vehicles and sustainable transportation’ (Island Press, 1995).
  9. 9)
     • 8. Dickerman, L., Harrison, J.: ‘A new car, a new grid’, IEEE Power Energy Mag., 2010, 8, (2), pp. 55–61.
  10. 10)
      • 11. Hayes, J.G., de Oliveira, R.P.R., Vaughan, S., et al: ‘Simplified electric vehicle power train models and range estimation’. Vehicle Power and Propulsion Conf. (VPPC), Chicago, IL, September 2011, pp. 1–5.
  11. 11)
      • 26. Dost, P., Spichartz, P., Sourkounis, C.: ‘Temperature influence on state-of-the-art electric vehicles’ consumption based on fleet measurements’. Int. Conf. on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles (ESARS), Aachen, Germany, March 2015, pp. 1–6.
  12. 12)
      • 17. Hu, X., Murgovski, N., Johannesson, L., et al: ‘Energy efficiency analysis of a series plug-in hybrid electric bus with different energy management strategies and battery sizes’, Appl. Energy, 2013, 111, pp. 1001–1009.
  13. 13)
      • 2. Armaroli, N., Balzani, V.: ‘Towards an electricity-powered world’, Energy Environ. Sci., 2011, 4, (9), pp. 3193–3222.
  14. 14)
      • 1. Eberle, U., von Helmolt, R.: ‘Sustainable transportation based on electric vehicle concepts: a brief overview’, Energy Environ. Sci., 2010, 3, (6), pp. 689–699.
  15. 15)
      • 19. Yi, Z., Bauer, P.H.: ‘Spatio-temporal energy demand models for electric vehicles’. Vehicle Power and Propulsion Conf. (VPPC), Coimbra, October 2014, pp. 1–6.
  16. 16)
      • 20. Yi, Z., Bauer, P.H.: ‘Optimal speed profiles for sustainable driving of electric vehicles’. Vehicle Power and Propulsion Conf. (VPPC), Montreal, Canada, October 2015, pp. 1–6.
  17. 17)
      • 9. Hu, X., Murgovski, N., Johannesson, L.M., et al: ‘Comparison of three electrochemical energy buffers applied to a hybrid bus powertrain with simultaneous optimal sizing and energy management’, IEEE Trans. Intell. Transp. Syst., 2014, 15, (3), pp. 1193–1205.
  18. 18)
      • 12. Prins, R., Hurlbrink, R., Winslow, L.: ‘Electric vehicle energy usage modelling and measurement’, Int. J. Mod. Eng., 2013, 13, (1), pp. 5–12.
  19. 19)
      • 27. Mehrdad, E., Yimin, G., Ali, E.: ‘Modern electric, hybrid electric, and fuel cell vehicles’ (CRC Press, Boca Raton, FL, 2010).
  20. 20)
      • 28. Bandhauer, T.M., Garimella, S., Fuller, T.F.: ‘A critical review of thermal issues in lithium ion batteries’, J. Electrochem. Soc., 2011, 158, (3), pp. R1–R25.
  21. 21)
      • 30. Hu, X., Li, S., Peng, H., et al: ‘Charging time and loss optimization for linmc and lifepo 4 batteries based on equivalent circuit models’, J. Power Sources, 2013, 239, pp. 449–457.
  22. 22)
      • 25. Damiani, C., Filisetti, A., Graudenzi, A., et al: ‘Parameter sensitivity analysis of stochastic models: application to catalytic reaction networks’, Comput. Biol. Chem., 2013, 42, (1), pp. 5–17.
  23. 23)
      • 15. Ondruska, P., Posner, I.: ‘Probabilistic attainability maps: efficiently predicting driver-specific electric vehicle range’. Intelligent Vehicles Symp. Proc., 2014, pp. 1169–1174.
  24. 24)
      • 16. Zhang, Y., Wang, W., Kobayashi, Y., et al: ‘Remaining driving range estimation of electric vehicle’. Int. Electric Vehicle Conf. (IEVC), 2012, pp. 1–7.
  25. 25)
      • 18. Yi, Z., Bauer, P.H.: ‘Energy consumption model and charging station placement for electric vehicles’. 3rd Int. Conf. on Smart Grids and Green IT Systems, Barcelona, Spain, April 2014, pp. 150–156.
  26. 26)
      • 5. Sioshansi, R., Denholm, P.: ‘Emissions impacts and benefits of plug-in hybrid electric vehicles and vehicle-to-grid services’, Environ. Sci. Technol., 2009, 43, (4), pp. 1199–1204.
  27. 27)
      • 10. Chan, C.-C., Bouscayrol, A., Chen, K.: ‘Electric, hybrid, and fuel-cell vehicles: architectures and modeling’, IEEE Trans. Veh. Technol., 2010, 59, (2), pp. 589–598.
  28. 28)
      • 31. Bolstad, W.M.: ‘Introduction to Bayesian statistics’ (John Wiley & Sons, 2013).
  29. 29)
      • 4. Bradley, T.H., Frank, A.A.: ‘Design, demonstrations and sustainability impact assessments for plug-in hybrid electric vehicles’, Renew. Sustain. Energy Rev., 2009, 13, (1), pp. 115–128.
  30. 30)
      • 22. Yuksel, T., Michalek, J.J.: ‘Effects of regional temperature on electric vehicle efficiency, range, and emissions in the united states’, Environ. Sci. Technol., 2015, 49, (6), pp. 3974–3980.
  31. 31)
      • 14. Ondruska, P., Posner, I.: ‘The route not taken: driver-centric estimation of electric vehicle range’. Twenty-Fourth Int. Conf. on Automated Planning and Scheduling, Portsmouth, New Hampshire, June 2014, pp. 413–420.