© The Institution of Engineering and Technology
This study presents an accurate and computationally efficient finite-element (FE) calculation and modelling methods for the simulation of symmetrical steady-state load conditions for synchronous generators. For that purpose, two iterative methods are presented, implemented and compared. Those are Newton’s iterative method and the relaxation parameter iterative method, which were both applied to magneto-static and transient FEs simulations. Various methods for obtaining armature voltage and power angle are proposed and analysed from the computational efficiency and the accuracy point of view. All methods showed good convergence results for solving this particular problem. Calculation results were compared with measurements on two synchronous generators installed in power plants.
References
-
-
1)
-
18. Deng, F., Demerdash, N.: ‘Cfe-ss approach for salient-pole synchronous generators under unbalances’, IEEE Trans. Aerosp. Electron. Syst., 1997, 33, (1), pp. 142–162 (doi: 10.1109/7.570733).
-
2)
-
19. Deng, F., Demerdash, N.A.: ‘Comprehensive salient-pole synchronous machine parametric design analysis using time-step finite element-state space modeling techniques’, IEEE Trans. Energy Convers., 1998, 13, (3), pp. 221–229 (doi: 10.1109/60.707599).
-
3)
-
13. Darabi, A., Tindall, C., Ferguson, S.: ‘Finite-element time-step coupled generator, load, avr, and brushless exciter modeling’, IEEE Trans. Energy Convers., 2004, 19, (2), pp. 258–264 (doi: 10.1109/TEC.2004.827293).
-
4)
-
21. Klamt, J.: ‘Berechnung und Bemessung elektrischer Maschinen’ (Springer-Verlag, 1962).
-
5)
-
27. Kim, C.E., Sykulski, J.: ‘Harmonic analysis of output voltage in synchronous generator using finite-element method taking account of the movement’, IEEE Trans. Magn., 2002, 38, (2), pp. 1249–1252 (doi: 10.1109/20.996319).
-
6)
-
16. Deng, F., Demerdash, N.: ‘A coupled finite-element state-space approach for synchronous generators. Part i: model development’, IEEE Trans. Aerosp. Electron. Syst., 1996, 32, (2), pp. 775–784 (doi: 10.1109/7.489520).
-
7)
-
12. Shima, K., Takahata, R., Takahashi, A., Enomoto, Y., Ide, K.: ‘Fast calculation of load conditions of permanent magnet synchronous machines using finite elements’. 18th Int. Conf. on Electrical Machines, 2008, ICEM 2008, September 2008, pp. 1–5.
-
8)
-
8. Ashtiani, C., Lowther, D.: ‘The use of finite elements in the simulation of the steady state operation of a synchronous generator with a known terminal loading condition’, IEEE Trans. Magn., 1983, 19, (6), pp. 2381–2384 (doi: 10.1109/TMAG.1983.1062867).
-
9)
-
7. Kunckel, S., Liese, M.: ‘Numeric magnetic field calculation and field current calculation for synchronous generators’, COMPEL: Int. J. Comput. Maths. Electr. Electron. Eng., 2006, 25, (2), pp. 270–282 (doi: 10.1108/03321640610648961).
-
10)
-
23. Pyrhönen, J., Jokinen, T., Hrabovcová, V., Niemelä, H.: ‘Design of rotating electrical machines’ (Wiley Online Library, 2008).
-
11)
-
4. Chari, M., Silvester, P.: ‘Analysis of turboalternator magnetic fields by finite elements’, IEEE Trans. Power Appar. Syst., 1971, PAS-90, (2), pp. 454–464 (doi: 10.1109/TPAS.1971.293046).
-
12)
-
2. Baojun, G., Zengfen, C., Peng, L., Zhiqiang, Z.: ‘Analysis of load characteristics for a 1000mw hydro-generator within considering saturation’. Asia-Pacific Power and Energy Engineering Conf. (APPEEC), March 2010, pp. 1–4.
-
13)
-
11. Ashtiani, C., Vaidya, J.: ‘Design evaluation of a high-speed permanent magnet generator for load performance by finite elements’, IEEE Trans. Magn., 1986, 22, (5), pp. 825–827 (doi: 10.1109/TMAG.1986.1064483).
-
14)
-
17. Deng, F., Demerdash, N., Vaidya, J., Shah, M.: ‘A coupled finite-element state-space approach for synchronous generators. Part ii: Applications’, IEEE Trans. Aerosp. Electron. Syst., 1996, 32, (2), pp. 785–794 (doi: 10.1109/7.489521).
-
15)
-
20. Escarela-Perez, R., Arjona-Lopez, M.A., Melgoza-Vazquez, E., Campero-Littlewood, E., Aviles-Cruz, C.: ‘A comprehensive finite-element model of a turbine-generator infinite-busbar system’, Finite Elem. Anal. Des., 2004, 40, pp. 485–509 (doi: 10.1016/S0168-874X(03)00074-X).
-
16)
-
24. Tessarolo, A., Bassi, C., Giulivo, D.: ‘Time-stepping finite-element analysis of a 14-mva salient-pole shipboard alternator for different damper winding design solutions’, IEEE Trans. Ind. Electron., 2012, 59, (6), pp. 2524–2535 (doi: 10.1109/TIE.2011.2157294).
-
17)
-
10. Gonzalez, A., Hernandez, C., Arjona, M.: ‘Two-dimensional finite element magnetostatic model of a permanent magnet synchronous generator for predicting its steady-state performance under different loading conditions’, IET Electr. Power Appl., 2013, 7, (3), pp. 207–213 (doi: 10.1049/iet-epa.2012.0182).
-
18)
-
25. Ashtiani, C.N., Lowther, D.A.: ‘Simulation of the steady-state reactances of a large water-wheel generator by finite elements’, IEEE Power Eng. Rev., 1984, PER-4, (7), pp. 52.
-
19)
-
6. Chari, M., Minnich, S., Csendes, Z., Berkery, J., Tandon, S.: ‘Load characteristics of synchronous generators by the finite-element method’, IEEE Trans. Power Appar. Syst., 1981, PAS-100, (1), pp. 1–13 (doi: 10.1109/TPAS.1981.316881).
-
20)
-
1. Zhou, P., McDermott, T., Cendes, Z., Rahman, M.: ‘Steady state analysis of synchronous generators by a coupled field-circuit method’. IEEE Int. Electric Machines and Drives Conf. Record, May 1997, pp. WC2/2.1–WC2/2.3.
-
21)
-
22. Boldea, I.: ‘The electric generators handbook: synchronous generators’, ser. Electric power engineering series. (CRC/Taylor & Francis, 2006).
-
22)
-
14. Chan, T.-F., Wang, W., Lai, L.-L.: ‘Permanent-magnet synchronous generator supplying an isolated load’, IEEE Trans. Magn., 2010, 46, (8), pp. 3353–3356 (doi: 10.1109/TMAG.2010.2044485).
-
23)
-
15. Wang, W., Cheng, K., Ding, K., Meng, L.: ‘A novel approach to the analysis of the axial-flux permanent-magnet generator with coreless stator supplying a rectifier load’, IEEE Trans. Magn., 2011, 47, (10), pp. 2391–2394 (doi: 10.1109/TMAG.2011.2158080).
-
24)
-
3. Dougherty, J., Minnich, S.: ‘Finite element modeling of large turbine generators; calculations versus load test data’, IEEE Trans. Power Appar. Syst., 1981, PAS-100, (8), pp. 3921–3929 (doi: 10.1109/TPAS.1981.316987).
-
25)
-
5. Zhang, Y., Sun, M., Guo, P.: ‘No-load characteristics analysis and rated field current calculation of multi-phase synchronous generator based on nonlinear with fem’. Int. Conf. on Electrical and Control Engineering (ICECE), September 2011, pp. 1628–1632.
-
26)
-
28. Montero, L., Mota, W., Jacobina, C.: ‘A microcomputer-based load angle and frequency measurement’. Conf. Proc. Instrumentation and Measurement Technology Conf., 1996, IMTC-96. Quality Measurements: The Indispensable Bridge between Theory and Reality, 1996, vol. 1, pp. 606–609.
-
27)
-
9. Ide, K., Wakui, S., Shima, K., Takahashi, M., Miyakawa, K., Yagi, Y.: ‘Analysis of saturated synchronous reactances of large turbine generator by considering cross-magnetizing reactances using finite elements’, IEEE Trans. Energy Convers., 1999, 14, (1), pp. 66–71 (doi: 10.1109/60.749149).
-
28)
-
26. Ide, K., Takahashi, M., Sato, M., Tsuji, E., Nishizawa, H.: ‘Higher harmonics calculation of synchronous generators on the basis of magnetic field analysis considering rotor movement’, IEEE Trans. Magn., 1992, 28, (2), pp. 1359–1362 (doi: 10.1109/20.123944).
http://iet.metastore.ingenta.com/content/journals/10.1049/iet-epa.2014.0040
Related content
content/journals/10.1049/iet-epa.2014.0040
pub_keyword,iet_inspecKeyword,pub_concept
6
6