References

• 1. 1)
     • 17. Farias, M.F., Battaiotto, P.E., Cendoya, M.G.: ‘Wind farm to weak-grid connection using UPQC custom power device’. Proc. 2010 IEEE Int. Conf. Industrial Technology, pp. 1745–1750.
  2. 2)
     • P.N. Tekwani , R. Kanchan , K. Gopakumar . Current-error space-vector-based hysteresis PWM controller for three-level voltage source inverter fed drives. IEE Proc., Electr. Power Appl. , 5 , 1283 - 1295
  3. 3)
     • 4. Gallo, D., Landi, C., Langella, R., Testa, A.: ‘Limits for low frequency interharmonic voltages: can they be based on the flickermeter use’. IEEE Power Tech Conf., Russia, 2005.
  4. 4)
     • 7. Sürgevil, T., Akpnar, E.: ‘Effects of electric arc furnace loads on synchronous generators and asynchronous motors’. Proc. Int. Conf. Electrical and Electronics Engineering ELECO2009, 5–8 November 2009, pp. I-49–I-53.
  5. 5)
     • 18. Schostan, S., Dettman, K.D., Purellku, I., Schulz, D.: ‘Harmonics and powers of doubly fed induction generators at balanced sinusoidal voltages’. International School on Nonsinusoidal Currents and Compensation, Łagów-Poland, 15–18 June 2010, pp. 213–217.
  6. 6)
     • 37. Ho, S.L., Fu, W.N.: ‘Analysis of indirect temperature-rise tests of induction machines using time stepping finite element method’, IEEE Trans. Energy Convers., 2001, 16, (1), pp. 55–60 (doi: 10.1109/60.911404).
  7. 7)
     • 39. IEC 61000-4-7: ‘Electromagnetic compatibility (EMC) – Part 4–7: Testing and measurement techniques – general guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto’, second edition 2002–08.
  8. 8)
     • 36. de Abreu, J.P.G., Emanuel, A.E.: ‘Induction motor thermal aging caused by voltage distortion and imbalance: loss of useful life and its estimated cost’, IEEE Trans. Ind. Appl., 2002, 38, (1), pp. 12–20 (doi: 10.1109/28.980339).
  9. 9)
     • 5. Testa, A., Langella, R.: ‘Power system subharmonics’. IEEE Power Engineering Society General Meeting, Italy, 2005.
  10. 10)
      • 35. de Abreu, J.P.G., Emanuel, A.E.: ‘Induction motor loss of life due to voltage imbalance and harmonics: a preliminary study’. Proc. Ninth Int. Conf. Harmonics and Quality of Power, Orlando, 1–4 October 2000, vol. 1, pp. 75–80.
  11. 11)
      • 32. Landi, C., Luiso, M.: ‘Performances assessment of electrical motors in presence of disturbances on power supply’. Proc. Int. Symp. Power Electronics Electrical Drives, Automation and Motion, 2008, pp. 167–172.
  12. 12)
      • 24. Stumpf, P., Jardan, R.K., Nagy, I.: ‘Subharmonics generated by space vector modulation in ultrahigh speed drives’, IEEE Trans. Ind. Electron., 2012, 59, (2), pp. 1029–1039 (doi: 10.1109/TIE.2011.2148683).
  13. 13)
      • 23. Jardan, R.K., Stumpf, P., Bartal, P., Varga, Z., Nagy, I.: ‘A novel approach in studying the effects of subharmonics on ultrahigh-speed ac motor drives’, IEEE Trans. Ind. Electron., 2011, 58, (4), pp. 1274–1281 (doi: 10.1109/TIE.2010.2098353).
  14. 14)
      • 34. Tennakoon, S.: ‘Flicker propagation in radial and interconnected power systems’. PhD dissertation, University of Wollongong, Australia, 2008.
  15. 15)
      • 26. EN 50160: ‘Voltage characteristic of electricity supplied by public distribution system’, 2007.
  16. 16)
      • 31. Gnaciński, P., Pepliński, M., Szweda, M.: ‘The effect of subharmonics on the flux in an induction cage machine’. Proc. Fifth Int. Workshop Compatibility in Power Electronics (CPE'07), Gdańsk-Jelitkowo, Poland, 29 May–1 June 2007.
  17. 17)
      • 3. Gnaciński, P.: ‘Thermal loss of life and load-carrying capacity of marine induction motors’, Energy Convers. Manage., 2014, 78, pp. 574–583 (doi: 10.1016/j.enconman.2013.11.023).
  18. 18)
      • 8. Tennakoon, S., Perera, S., Robinson, D.: ‘Flicker attenuation – Part I: response of three-phase induction motors to regular voltage fluctuations’, IEEE Trans. Power Deliv., 2008, 23, (2), pp. 1207–1214 (doi: 10.1109/TPWRD.2007.908788).
  19. 19)
      • 22. Song, W., Smedley, K., Feng, X.: ‘One-cycle control of induction machine traction drive for high speed railway, Part II Square wave modulation region’. Proc. 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conf. and Exposition (APEC), 6–11 March 2011, pp. 1003–1009.
  20. 20)
      • 16. Drabek, P., Kus, V.: ‘EMC issues of low frequency interference of power electronic converters’, Appl. Mech. Mater., 2013, 284–287, pp. 2516–2520.
  21. 21)
      • 14. Yılmaz, I., Ermis, M., Cadırcı, I.: ‘Medium-frequency induction melting furnace as a load on the power system’, IEEE Trans. Ind. Appl., 2012, 48, (4), pp. 1203–1214 (doi: 10.1109/TIA.2012.2199457).
  22. 22)
      • 6. Emanuel, E.A., Humi, M.: ‘Magnetizing current harmonics, interharmonics and subharmonics an analytical study’. Fourteenth Int. Conf. Harmonics and Quality of Power, 26–29 September 2010.
  23. 23)
      • 40. Tarasiuk, T.: ‘Estimator-analyzer of power quality: Part I – methods and algorithms’, Meas., J. Int. Meas.Confederation, 2011, 44, (1), pp. 238–247 (doi: 10.1016/j.measurement.2010.09.049).
  24. 24)
      • 10. Hsu, C.T., Chen, C.S., Lin, C.H.: ‘Electric power system analysis and design of an expanding steel cogeneration plant’, IEEE Trans. Ind. Appl., 2011, 47, (4), pp. 1527–1535 (doi: 10.1109/TIA.2011.2155021).
  25. 25)
      • P.H. Mellor , D. Roberts , D.E. Turner . Lumped parameter thermal model for electrical machines of TEFC design. Proc. Inst. Electr. Eng. B , 5 , 205 - 218
  26. 26)
      • 21. Song, W., Smedley, K., Feng, X., Sun, P.: ‘One-cycle control of induction machine traction drive for high speed railway Part I: Multi-pulse width modulation region’. Proc. 36th Annual Conf. IEEE Industrial Electronics Society (IECON 2010), 7–10 November 2010, pp. 2346–2351.
  27. 27)
      • 30. Baptista, J., Gonçalves, J., Soares, S., et al: ‘Induction motor response to periodical voltage fluctuations’. Proc. Nineteenth Int. Conf. Electrical Machines ICEM, Roma, Italy, 2010.
  28. 28)
      • 19. Barros, J., de Apraiz, M., Diego, R.I.: ‘Measurement of subharmonics in power voltages’. Power Tech 2007 IEEE Conf., Lausanne, Switzerland, 1–5 July 2007, pp. 1736–1740.
  29. 29)
      • 9. Kolagar, A.D., Shoulaie, A.: ‘Reduction of undesired harmonic components in a steel industrial plant with DC electric arc furnaces’. Proc. Second Power Electronics, Drive Systems and Technologies Conf., 2011.
  30. 30)
      • 12. Bolen, M.H.J., Gu, I.Y.H.: ‘Signal processing of power quality disturbances’ (Wiley, New York, 2006).
  31. 31)
      • 25. Stumpf, P., Varga, Z., Sepsi, T.D., Jardan, R.K., Nagy, I.: ‘Ultrahigh speed induction machine overheated by subharmonics of PWM inverter’. Thirty-Sixth Annual Conf. IEEE Industrial Electronics Society (IECON 2010), 7–10, November 2010, pp. 1754–1759.
  32. 32)
      • 1. Gnaciński, P.: ‘Prediction of windings temperature rise in induction motors supplied with distorted voltage’, Energy Convers. Manage., 2008, 49, (4), pp. 707–17 (doi: 10.1016/j.enconman.2007.07.023).
  33. 33)
      • 29. Lazim, M.T., Shepherd, W.: ‘Analysis of induction motors subjected to nonsinusoidal voltage containing subharmonics’, IEEE Trans. Ind. Appl., 1985, IA-21, (4), pp. 956–965 (doi: 10.1109/TIA.1985.349566).
  34. 34)
      • 28. de Abreu, J.P.G., Emanuel, A.E.: ‘The need to limit subharmonics injection’. Proc. Ninth Int. Conf. Harmonics and Quality of Power, Orlando, 1–4 October 2000, vol. 1, pp. 251–253.
  35. 35)
      • 15. Chang, G.W., Chen, S.K., Su, H.J., Wang, P.K.: ‘Accurate assessment of harmonic and interharmonic currents generated by VSI-fed drives under unbalanced supply voltages’, IEEE Trans. Power Deliv., 2011, 26, (2), pp. 1083–1091 (doi: 10.1109/TPWRD.2010.2089473).
  36. 36)
      • 11. Deokar, S.A., Waghmare, L., Ganesh, M.N.: ‘Voltage flicker assessment of induction motors used in the integrated water pumping station’. Proc. 2010 Joint Int. Conf. Drive and Energy Systems (PEDES) & 2010 Power India, 2010.
  37. 37)
      • 33. Bucci, G., Fiorucci, E., Ometto, A., Rotondale, N.: ‘The evaluation of the effects of the voltage amplitude modulations on induction motors’. Proc. IEEE Power Tech Conf., Russia, 27–30 June 2005.
  38. 38)
      • P. Gnacinski . Windings temperature and loss of life of an induction machine under voltage unbalance combined with over- or undervoltages. IEEE Trans. Energy Convers. , 2 , 363 - 371
  39. 39)
      • E.F. Fuchs , D.J. Roesler , M.A.S. Masoum . Are harmonic recommendations according to IEEE and IEC too restrictive?. IEEE Trans. Power Deliv. , 4 , 1775 - 1786
  40. 40)
      • 13. Aravena, P., Morán, L., Dixon, J., Joos, G.: ‘Active compensation of sub and interharmonics in cycloconverter-fed grinding mill drives’. Proc. 2010 IEEE Industry Applications Society Annual Meeting, 2010.