© The Institution of Engineering and Technology
This study deals with the influence of voltage subharmonics and interharmonics on an induction cage machine. The windings current subharmonics and interharmonics as well as the magnetising current are studied. The effect of voltage subharmonics and interharmonics on windings temperature rise is analysed. The results of measurements and calculations are compared for various machine models. The appropriate investigations are performed for two low-power, totally enclosed induction motors of different properties: a machine with a comparatively strongly saturated magnetic circuit, and one with a comparatively weakly saturated magnetic circuit.
References
-
-
1)
-
17. Farias, M.F., Battaiotto, P.E., Cendoya, M.G.: ‘Wind farm to weak-grid connection using UPQC custom power device’. Proc. 2010 IEEE Int. Conf. Industrial Technology, pp. 1745–1750.
-
2)
-
P.N. Tekwani ,
R. Kanchan ,
K. Gopakumar
.
Current-error space-vector-based hysteresis PWM controller for three-level voltage source inverter fed drives.
IEE Proc., Electr. Power Appl.
,
5 ,
1283 -
1295
-
3)
-
4. Gallo, D., Landi, C., Langella, R., Testa, A.: ‘Limits for low frequency interharmonic voltages: can they be based on the flickermeter use’. IEEE Power Tech Conf., Russia, 2005.
-
4)
-
7. Sürgevil, T., Akpnar, E.: ‘Effects of electric arc furnace loads on synchronous generators and asynchronous motors’. Proc. Int. Conf. Electrical and Electronics Engineering ELECO2009, 5–8 November 2009, pp. I-49–I-53.
-
5)
-
18. Schostan, S., Dettman, K.D., Purellku, I., Schulz, D.: ‘Harmonics and powers of doubly fed induction generators at balanced sinusoidal voltages’. International School on Nonsinusoidal Currents and Compensation, Łagów-Poland, 15–18 June 2010, pp. 213–217.
-
6)
-
37. Ho, S.L., Fu, W.N.: ‘Analysis of indirect temperature-rise tests of induction machines using time stepping finite element method’, IEEE Trans. Energy Convers., 2001, 16, (1), pp. 55–60 (doi: 10.1109/60.911404).
-
7)
-
8)
-
36. de Abreu, J.P.G., Emanuel, A.E.: ‘Induction motor thermal aging caused by voltage distortion and imbalance: loss of useful life and its estimated cost’, IEEE Trans. Ind. Appl., 2002, 38, (1), pp. 12–20 (doi: 10.1109/28.980339).
-
9)
-
5. Testa, A., Langella, R.: ‘Power system subharmonics’. IEEE Power Engineering Society General Meeting, Italy, 2005.
-
10)
-
35. de Abreu, J.P.G., Emanuel, A.E.: ‘Induction motor loss of life due to voltage imbalance and harmonics: a preliminary study’. Proc. Ninth Int. Conf. Harmonics and Quality of Power, Orlando, 1–4 October 2000, vol. 1, pp. 75–80.
-
11)
-
32. Landi, C., Luiso, M.: ‘Performances assessment of electrical motors in presence of disturbances on power supply’. Proc. Int. Symp. Power Electronics Electrical Drives, Automation and Motion, 2008, pp. 167–172.
-
12)
-
24. Stumpf, P., Jardan, R.K., Nagy, I.: ‘Subharmonics generated by space vector modulation in ultrahigh speed drives’, IEEE Trans. Ind. Electron., 2012, 59, (2), pp. 1029–1039 (doi: 10.1109/TIE.2011.2148683).
-
13)
-
23. Jardan, R.K., Stumpf, P., Bartal, P., Varga, Z., Nagy, I.: ‘A novel approach in studying the effects of subharmonics on ultrahigh-speed ac motor drives’, IEEE Trans. Ind. Electron., 2011, 58, (4), pp. 1274–1281 (doi: 10.1109/TIE.2010.2098353).
-
14)
-
34. Tennakoon, S.: ‘Flicker propagation in radial and interconnected power systems’. PhD dissertation, University of Wollongong, Australia, 2008.
-
15)
-
16)
-
31. Gnaciński, P., Pepliński, M., Szweda, M.: ‘The effect of subharmonics on the flux in an induction cage machine’. Proc. Fifth Int. Workshop Compatibility in Power Electronics (CPE'07), Gdańsk-Jelitkowo, Poland, 29 May–1 June 2007.
-
17)
-
3. Gnaciński, P.: ‘Thermal loss of life and load-carrying capacity of marine induction motors’, Energy Convers. Manage., 2014, 78, pp. 574–583 (doi: 10.1016/j.enconman.2013.11.023).
-
18)
-
8. Tennakoon, S., Perera, S., Robinson, D.: ‘Flicker attenuation – Part I: response of three-phase induction motors to regular voltage fluctuations’, IEEE Trans. Power Deliv., 2008, 23, (2), pp. 1207–1214 (doi: 10.1109/TPWRD.2007.908788).
-
19)
-
22. Song, W., Smedley, K., Feng, X.: ‘One-cycle control of induction machine traction drive for high speed railway, Part II Square wave modulation region’. Proc. 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conf. and Exposition (APEC), 6–11 March 2011, pp. 1003–1009.
-
20)
-
16. Drabek, P., Kus, V.: ‘EMC issues of low frequency interference of power electronic converters’, Appl. Mech. Mater., 2013, 284–287, pp. 2516–2520.
-
21)
-
14. Yılmaz, I., Ermis, M., Cadırcı, I.: ‘Medium-frequency induction melting furnace as a load on the power system’, IEEE Trans. Ind. Appl., 2012, 48, (4), pp. 1203–1214 (doi: 10.1109/TIA.2012.2199457).
-
22)
-
6. Emanuel, E.A., Humi, M.: ‘Magnetizing current harmonics, interharmonics and subharmonics an analytical study’. Fourteenth Int. Conf. Harmonics and Quality of Power, 26–29 September 2010.
-
23)
-
40. Tarasiuk, T.: ‘Estimator-analyzer of power quality: Part I – methods and algorithms’, Meas., J. Int. Meas.Confederation, 2011, 44, (1), pp. 238–247 (doi: 10.1016/j.measurement.2010.09.049).
-
24)
-
10. Hsu, C.T., Chen, C.S., Lin, C.H.: ‘Electric power system analysis and design of an expanding steel cogeneration plant’, IEEE Trans. Ind. Appl., 2011, 47, (4), pp. 1527–1535 (doi: 10.1109/TIA.2011.2155021).
-
25)
-
P.H. Mellor ,
D. Roberts ,
D.E. Turner
.
Lumped parameter thermal model for electrical machines of TEFC design.
Proc. Inst. Electr. Eng. B
,
5 ,
205 -
218
-
26)
-
21. Song, W., Smedley, K., Feng, X., Sun, P.: ‘One-cycle control of induction machine traction drive for high speed railway Part I: Multi-pulse width modulation region’. Proc. 36th Annual Conf. IEEE Industrial Electronics Society (IECON 2010), 7–10 November 2010, pp. 2346–2351.
-
27)
-
30. Baptista, J., Gonçalves, J., Soares, S., et al: ‘Induction motor response to periodical voltage fluctuations’. Proc. Nineteenth Int. Conf. Electrical Machines ICEM, Roma, Italy, 2010.
-
28)
-
19. Barros, J., de Apraiz, M., Diego, R.I.: ‘Measurement of subharmonics in power voltages’. Power Tech 2007 IEEE Conf., Lausanne, Switzerland, 1–5 July 2007, pp. 1736–1740.
-
29)
-
9. Kolagar, A.D., Shoulaie, A.: ‘Reduction of undesired harmonic components in a steel industrial plant with DC electric arc furnaces’. Proc. Second Power Electronics, Drive Systems and Technologies Conf., 2011.
-
30)
-
12. Bolen, M.H.J., Gu, I.Y.H.: ‘Signal processing of power quality disturbances’ (Wiley, New York, 2006).
-
31)
-
25. Stumpf, P., Varga, Z., Sepsi, T.D., Jardan, R.K., Nagy, I.: ‘Ultrahigh speed induction machine overheated by subharmonics of PWM inverter’. Thirty-Sixth Annual Conf. IEEE Industrial Electronics Society (IECON 2010), 7–10, November 2010, pp. 1754–1759.
-
32)
-
1. Gnaciński, P.: ‘Prediction of windings temperature rise in induction motors supplied with distorted voltage’, Energy Convers. Manage., 2008, 49, (4), pp. 707–17 (doi: 10.1016/j.enconman.2007.07.023).
-
33)
-
29. Lazim, M.T., Shepherd, W.: ‘Analysis of induction motors subjected to nonsinusoidal voltage containing subharmonics’, IEEE Trans. Ind. Appl., 1985, IA-21, (4), pp. 956–965 (doi: 10.1109/TIA.1985.349566).
-
34)
-
28. de Abreu, J.P.G., Emanuel, A.E.: ‘The need to limit subharmonics injection’. Proc. Ninth Int. Conf. Harmonics and Quality of Power, Orlando, 1–4 October 2000, vol. 1, pp. 251–253.
-
35)
-
15. Chang, G.W., Chen, S.K., Su, H.J., Wang, P.K.: ‘Accurate assessment of harmonic and interharmonic currents generated by VSI-fed drives under unbalanced supply voltages’, IEEE Trans. Power Deliv., 2011, 26, (2), pp. 1083–1091 (doi: 10.1109/TPWRD.2010.2089473).
-
36)
-
11. Deokar, S.A., Waghmare, L., Ganesh, M.N.: ‘Voltage flicker assessment of induction motors used in the integrated water pumping station’. Proc. 2010 Joint Int. Conf. Drive and Energy Systems (PEDES) & 2010 Power India, 2010.
-
37)
-
33. Bucci, G., Fiorucci, E., Ometto, A., Rotondale, N.: ‘The evaluation of the effects of the voltage amplitude modulations on induction motors’. Proc. IEEE Power Tech Conf., Russia, 27–30 June 2005.
-
38)
-
P. Gnacinski
.
Windings temperature and loss of life of an induction machine under voltage unbalance combined with over- or undervoltages.
IEEE Trans. Energy Convers.
,
2 ,
363 -
371
-
39)
-
E.F. Fuchs ,
D.J. Roesler ,
M.A.S. Masoum
.
Are harmonic recommendations according to IEEE and IEC too restrictive?.
IEEE Trans. Power Deliv.
,
4 ,
1775 -
1786
-
40)
-
13. Aravena, P., Morán, L., Dixon, J., Joos, G.: ‘Active compensation of sub and interharmonics in cycloconverter-fed grinding mill drives’. Proc. 2010 IEEE Industry Applications Society Annual Meeting, 2010.
http://iet.metastore.ingenta.com/content/journals/10.1049/iet-epa.2013.0422
Related content
content/journals/10.1049/iet-epa.2013.0422
pub_keyword,iet_inspecKeyword,pub_concept
6
6