© The Institution of Engineering and Technology
A single-step ductile dicing process capable of manufacturing optical quality facets in lithium niobate (LiNbO3) ridge waveguides with an average surface roughness of 0.29 nm is reported. This result is comparable with surface roughnesses achieved by lapping and polishing and represents an order of magnitude improvement over the prior state of the art in LiNbO3 waveguide facet dicing.
References
-
-
1)
-
4. Sun, J., Gan, Y., Xu, C.: ‘Efficient green-light generation by proton-exchanged periodically poled MgO: LiNbO3 ridge waveguide’, Opt. Lett., 2011, 36, (4), pp. 549–551 (doi: 10.1364/OL.36.000549).
-
2)
-
1. Mittal, V., Aghajani, A., Carpenter, L.G., et al: ‘Fabrication and characterization of high-contrast mid-infrared GeTe4 channel waveguides’, Opt. Lett., 2015, 40, (9), pp. 2016–2019 (doi: 10.1364/OL.40.002016).
-
3)
-
2. Sugita, T., Mizuuchi, K., Yamamoto, K., et al: ‘Highly efficient second-harmonic generation in direct-bonded MgO: LiNbO3 pure crystal waveguide’, Electron. Lett., 2004, 40, (21), pp. 1359–1361 (doi: 10.1049/el:20046010).
-
4)
-
6. Gerthoffer, A., Guyot, C., Qiu, W., et al: ‘Strong reduction of propagation losses in LiNbO3 ridge waveguides’, Opt. Mater., 2014, 38, pp. 37–41 (doi: 10.1016/j.optmat.2014.09.027).
-
5)
-
5. Sun, J., Xu, C.: ‘466 mW green light generation using annealed proton-exchanged periodically poled MgO: LiNbO3 ridge waveguides’, Opt. Lett., 2012, 37, (11), pp. 2028–2030 (doi: 10.1364/OL.37.002028).
-
6)
-
3. Chauvet, M., Henrot, F., Bassignot, F., et al: ‘High efficiency frequency doubling in fully diced LiNbO3 ridge waveguides on silicon’, J. Opt., 2016, 18, p. 085503 (doi: 10.1088/2040-8978/18/8/085503).
-
7)
-
7. Bifano, T.G., Dow, T., Scattergood, R.O.: ‘Ductile-regime grinding: a new technology for machining brittle materials’, J. Eng. Ind. (Trans. ASME), 1991, 113, pp. 184–189 (doi: 10.1115/1.2899676).
-
8)
-
8. Bazzan, M., Sada, C.: ‘Optical waveguides in lithium niobate: recent developments and applications’, Appl. Phys. Rev., 2015, 2, p. 040603 (doi: 10.1063/1.4931601).
http://iet.metastore.ingenta.com/content/journals/10.1049/el.2017.2863
Related content
content/journals/10.1049/el.2017.2863
pub_keyword,iet_inspecKeyword,pub_concept
6
6
Correspondence
This article has following corresponding article(s):
in brief