© The Institution of Engineering and Technology
A high boost ratio non-isolated converter with a ripple-free input current is proposed, which combines a zero-ripple boost cell and a coupled inductor to achieve a high output voltage step-up. A passive snubber is utilised to suppress voltage spike of the switch caused by the resonance of the leakage inductance of the coupled inductor and the parasitic capacitance of the switch. Therefore, a low-voltage-rated metal oxide semiconductor field effect transistor (MOSFET) with low r DS(ON) can be used to improve the efficiency of the converter. In addition, a ripple-free input current can be achieved, making the electromagnetic interference (EMI) filter simple. Experimental results of a 100 W (40 V/200 V) prototype are presented to verify the analysis results of the proposed converter.
References
-
-
1)
-
R.J. Wai ,
R.Y. Duan
.
High step-up converter with coupled-inductor.
IEEE Trans. Power Electron.
,
5 ,
1025 -
1035
-
2)
-
M. Prudente ,
L.L. Pfitscher ,
G. Emmendoerfer ,
E.F. Romaneli ,
R. Gules
.
Voltage multiplier cells applied to non-isolated DC–DC converters.
IEEE Trans. Power Electron.
,
2 ,
871 -
887
-
3)
-
B. Axelrod ,
Y. Berkovich ,
A. Ioinovici
.
Switched-capacitor/switched-inductor structures for getting transformerless hybrid DC–DC PWM converters.
IEEE Trans. Circuits Syst. I
,
2 ,
687 -
696
-
4)
-
Z. Qun ,
F.C. Lee
.
High-efficiency, high step-up DC–DC converters.
IEEE Trans. Power Electron.
,
65 -
73
-
5)
-
1. Chen, S.M., Liang, T.J., Yang, L.S., et al: ‘A safety enhanced, high step-up DC–DC converter for AC photovoltaic module application’, IEEE Trans. Power Electron., 2012, 27, (4), pp. 1809–1817 (doi: 10.1109/TPEL.2011.2170097).
http://iet.metastore.ingenta.com/content/journals/10.1049/el.2013.3984
Related content
content/journals/10.1049/el.2013.3984
pub_keyword,iet_inspecKeyword,pub_concept
6
6
High boost ratio DC–DC converter with ripple-free input current