Flexible alternating current transmission system (FACTS) devices are expensive, and it is necessary to ensure that their functionality is required before specifying them. They perform four basic functions, which can be combined in different devices: 1. Power transfer between electrically separated systems 2. Active power management 3. Reactive power management 4. Waveform quality management.Active power management devices (for example phase shifters, static synchronous series compensators and unified power flow controllers) that are less relevant to wind technology, either internally or in connection terms, will not be discussed here. Current source converters for high-voltage direct current (HVDC) are dealt with for completeness, although it is likely that most large wind farms would be connected by voltage source converter technology, and doubly fed induction generators (DFIGs) apply this technology in their rotor circuits. Synchronous connection by lines and cables makes two electrical systems behave as one. This clearly is inappropriate if the frequencies are different or one system has a stability or fault level problem that would be exacerbated by connection with another source. In these circumstances the systems may be maintained as separate entities through a converter/inverter DC path. In each of the other applications, traditional technology exists but performs its function slowly or within a narrow range. It is the need for rapid action in controlling active and reactive power and the need to manage a wide range of waveform distortion problems that requires the application of FACTS devices.